How does electrically operated slide gate opener work
- The weight of the gate rest on a level rail. Depending on the length,
the gate is guided by a number of roller bracket sets for opening and
closing. There is no chance of derailing the gate.
- Microprocessor inside the opener received encrypted signal from the
remote control, amongst other operation such as auto reversal upon
obstruction and recognizing up to 16 remote control, opens or closes
the door electrically with a motor.
- The gate opener only needs to overcome inertia and friction to move
the gate. Gate can go up to 10 meter in length and 500 Kg in weight.
Material can be stainless steel, wrought iron, brass, Aluminum or
glass.
Safety and convenience features of slide gate
- Soft-start/soft-start and smooth movement at around 20cm per second.
- Partial open in pedestrian mode.
- Infra-red sensor for added protection, it will reverse door movement
upon detection of possible obstruction.
- Optional auto-closing preset by internal timer and external lighting
control.
- Auto-lock when closed, not extra locking mechanism required.
Special purpose slide gates
How does uphill slide gate work
- The gate is trapezoidal to match the slope.
- The entire weight of the gate rests on a rails.
- Powerd by Tousek frequency converter motor withc mechanical brake to
arrest the gate in stop position.
- One-way reduction gear to counter the downward m•g•Sinθ component.
How does curved slide gate work
- The entire weight of the gate rests on a curved rails with turning
radius of 0.5m.
- Each leaf is about 1m in width.
- Powerd by Tousek frequency converter motor for maximum torque at very
low starting speed.
- Wall-mount top track for stability.
How does telescopic gate work with only 1 motor
- The entire weight of the gate rests on the rails where the wheels
moves on, therefore no hanging track needed.
- The active leaf is driven by the motor through the teeth racks.
- The passive leaf is driven by a chain-and-sprocket telescopic gear. It
will travel as double speed.
- (1) motor; (2) rail; (3) travel limit; (4) top roller bracket; (5)
safe strike; (6) teeth rack; (7) chain-and-sprocket drive.
How does cantilever gate work without ground track
- The entire weight of the gate rests on stationary carriages where the
gate slides on, therefore no track needed.
- Automation of cantilever gate is the same as slide gate with track.
- The gate opener only needs to overcome inertia and friction to move
the gate. Gate can go up to 10 meter in length and 500 Kg in weight.
Material can be stainless steel, wrought iron, brass, Aluminum or
glass.
- (1) carriages; (2) parking wheel; (3) monorail; (4) guide-in fork; (5)
turnbuckle; (6) guide bracket; (Z) diagonal tie; (D) diagonal tie.
