How does electrically operated swing gate opener work
- The weight of the gate rest on hinges securely bolted to the pillar. The gate swings open by an electrically operated arm, one side secured to the pillar, the other side fastened to the gate.
- Microprocessor inside the control box received encrypted signal from the remote control, amongst other operation such as auto reversal upon obstruction and recognizing up to 16 remote control, opens or closes the door electrically with a motor inside the arm.
- The gate opener only needs to overcome inertia and friction to move the gate.
- Gate can go up to 5 meter in length and 400 Kg in weight per leave. Material can be stainless steel, wrought iron, brass, Aluminum or glass, hot-dip galvanized steel with powder coating.
180° Swing gate opener
- Some car parks require 180∘opening for easy access.
- Underground motorized opener can open all the way to 180°.
- It is controlled by the same electronics that work on electrical arms.
For Cars
For Pedestrians
Safety and convenience features of swing gate
- Soft-start/soft-start and smooth movement at around 20cm per second.
- Car mode with both bi-parting leaves open.
- Pedestrian mode with one side of gate open only.
- Infra-red sensor for added protection, it will reverse door movement upon detection of possible obstruction.
- Optional auto-closing preset by internal timer and external lighting control.
- Auto-lock when closed, not extra locking mechanism required.
- From medium gate to large up to 12m in width and 4T in weight.
- Frequency controlled motor for 10-second opening.
- Very east to switch to manual mode in case of power outage.
- Opens to 110° max.
- Suitable for small to mendium size with IP65 submergeble motor.
- Frequency controlled motor for 10-second opening
- Need drainage provision.
- 180° opening possible.
How does swing gate work with arm
- The entire weight of the gate hinged to the wall or post.
- Each leaf is driven by the motorized arm for opening and closing.
- Travel limits and lock required.
- Special equipment available for uphill open.
- (1) bearing hinge; (2) Tousek hi-speed arm; (3) floor lock; (4) flash light; (5) sensor.
How does swing gate work with underground motor
- The entire weight of the gate hinged to the wall or post and sits on the underground motor.
- Each leaf is driven by the underground motor for opening and closing.
- Travel limits and lock required.
- Open speed from 10s to 25s depending on weight and solidity
- (1) bearing pivot; (2) underground motor; (3) travel limit; (4) sensor; (5) flash light.