工程實例

主頁 5 工程實例

2007-2010

2011-2015

2016-2021

2007-2010

跑馬地比雅道玻璃電動車房門:

由于樓底太低及有橫樑阻擋,業主立案法團采納我們的一體式canopy車房門設計.

車房門的材料為鋁合金-鋼化磨砂玻璃.美觀大方又適合香港潮濕的天氣,永不生銹.

美國LiftMaster開門機有遇阻倒車等安全功能.遙控器可在50米開外的距離開關車房門.

2007-2010

薄扶林金粟街鋁合金-玻璃電動車房門:

為配合獨立屋的整體建筑風格,業主為他2.4米的車房選擇了Clopay一體式鋁合金-鋼化磨砂玻璃車房門.

玻璃車房門有極佳的采光功能.

美國LiftMaster開門機采用皮帶傳動設計,開關車房門時既快捷又安靜.

點擊 這里 觀看詳情

2007-2010

北京四合院銅門:

古典的四合院大門有嚴格的設計要求,分王府大門,廣亮大門,金柱大門,蠻子門等等.

按照業主的要求,我們將將四合院的整個大門用純銅來制做.

安裝了美國LiftMaster開門機和Dial2open后,

2007-2010

3.6m 實木雙掩門:

位于半山的別墅相當大風.故此實木的電閘采用了落地式門軸,以增強抗風功能.

為進一步提高抗風能力,我們為右邊的一扇門安裝了機械地鎖,用左邊一扇門的活動來將右邊門鎖死在地面.

遙控電閘安裝了美國LiftMaster LYN 400開門機和Dial2open,業主可以用遙控器開門,更可以通過手機撥號開門.方便非常.

2007-2010

南塘道鐵藝雙趟閘:

位于半山的別墅的雙趟閘下面行高碳鋼路軌,上面用槽鋼導住,絕對安全.

左右趟閘各安裝一部力馬SLY300開門機..

使用一個3鍵遙控器,可以單獨控制單邊趟閘,或者同時控制雙閘.

點擊 這里 觀看詳情.

2007-2010

8m 鉛水鐵閘:

幼稚園安裝8米寬的遙控電閘.

由于鐵閘長8米,重達700Kg,我們為電閘安裝了美國LiftMaster SLY 1000開門機.

為確保安全,我們為趟閘加裝了防跌鋼架和四組紅外線.

2007-2010

鍍鋅鋼板電動車房門:

新業主的車房原來安裝一部電動卷閘.

他裝修時決定將舊的卷閘更換為先進的翻板式車房門.

新的鍍鋅鋼板車房門配合上力馬開門機既寧靜又快速.

比較起鄰居的卷閘, 翻板式足足高出2吋.

點擊 這里 觀看我們怎樣對新裝的車房門進行測試.

2007-2010

鋁合金-鋼化玻璃電動車房門:

業主要為海邊的別墅安裝既能突出個性又適合海邊環境的車房門.

穩得利為他安裝了美國Clopay的鋁合金-鋼化玻璃車房門.

鋁合金-鋼化玻璃完全適合海邊潮濕咸氣重的環境.

白色的鋁框和磨砂玻璃完全溶入別墅的建筑風格.

到了晚上, 半透明的玻璃讓車房變成一處美麗的夜景.

2007-2010

不銹鋼-實木遙控電閘:

為配合獨立屋的風格, 業主要安裝5米長的遙控趟閘.

我們選用了美國力馬開門機來操控這度500Kg重的巨無霸.

由于地面下沉, 初裝期間需要不斷的調試. 三個月后電閘便可正常使用.

2007-2010

不銹鋼-玻璃遙控掩閘:

錦繡花園的獨立屋不能安裝趟閘, 業主安裝了電動雙掩閘.

掩閘有行人模式(只開一邊)和行車模式(兩邊一起打開).

業主回家時只要在車上輕按遙控器便可打開花園電閘. 無需下車開閘.

點擊 這里 觀看平掩閘的操作.

2011-2015

假日酒店電閘: (2015)

Steel frame with aluminium computer-cut 3-D pattern.

Powered by FAAC openers for remote control access.

State-of-art rolling code transmission technology for remote controller ensures highest level of security.

We designed and built both run-in and run-out gates for this prestigious hotel.

2011-2015

新鴻基爾巒電閘: (2015)

Steel frame with double-layer aluminium computer-cut tree pattern.

Powered by LiftMaster openers for remote control access.

State-of-art rolling code transmission technology for remote controller ensures highest level of security.

We designed and built 160 sets of gate for this prestigious development.

2011-2015

清水灣君爵堡 馬丁車房門: (2015)

Aluminium section garage door with tempered glass top panel.

Matching side door with letter box.

Carriage style antique hardware.

Powered with electrically operated opener for remote control access.

2011-2015

贊善里微熱山莊:

Balanced by count-weight, the whole door goes up as if float-away.

Built by Renlita USA according to ANSI standard.

Approved by BD.

Powered with electrically operated opener for remote control access.

2011-2015

九龍塘德雲道電閘:

6m swing gate for vehicle access.

3m swing gate for pedestrian access.

Classic design in matted black.

Powered by underground opener for remote control access.

2011-2015

何文田加多利峯摺趟閘:

Proprietary fold gate specially designed for tight space.

Double-layer aluminium wave pattern.

No hanging track required.

Powered by electrically operated opener for remote control access.

2011-2015

元朗工業村15米電動趟閘:

Stainless steel gate 1.8T in weight approved BD.

Powered by LiftMaster SLY3500 for remote control access.

Rubber safety edge will reverse closing door when obstruction detected.

High tensile rail for heavy trucks.

2011-2015

錦上路馬丁車房門:

Martin Athena 5-section garage doors.

Stunningly modern with aluminium frame and tempered glass panels.

Powered by LiftMaster garage door opener for remote control access.

Metallic powder coat finish with matching louver for better ventilation.

2011-2015

深涌路5米電動趟閘:

Steel frame with real wood and stainless steel trim.

Powered by LiftMaster SLY500 opener for remote control access.

With matching frameless aluminium fence and GSM intercom system.

2011-2015

滌濤山馬丁車房門:

Martin Cornerstone model 5-section garage door.

Windows in the top panel for better look and illumination.

Powered by LiftMaster garage door opener for remote control access.

5-year warranty.

2011-2015

龍蝦灣雙向趟閘:

Steel frame with composite wood.

Matching pedestrian door with electric lock.

Powered by 2 LiftMaster SLY500 openers for remote control access.

Design and built in record 2-week lead time.

2011-2015

窩打老道銅藝趟閘:

Made of pure copper panel and steel frame.

Wicket side door for easy pedestrian access.

Powered by LiftMaster SLY500 opener for remote control access.

2011-2015

新鴻基天巒電動趟閘:

Slide gates operated by mobile phone.

Rubber safety edge will reverse closing door when obstruction detected.

Powered by LiftMaster SLY500 opener for remote control access.

2011-2015

睦誠徑 Hörmann 車房門:

Automatic garage door for remote control access.

Wicket door for easy pedestrian access.

Even the wicket door is remote controlled.

Note the extremely small trip-free threshold.

2011-2015

流浮山譽峰鐵藝電閘:

The gate pattern is mathematically generated and CNC cut from a 1-piece of stainless steel.

Wireless intercom based on GSM technology.

Owner can open the gate with a mobile phone.

Visitor using the intercom will be connected to the owner by mobile phone who can then open the gate even when he is not at phone.

2011-2015

石澳山仔路電動3摺電閘:

The architect came to Wonderlee for solution to build automatic gate at main entrance of a slope.

The trapezoidal middle panel folds right when open to avoid having a big gap on the downhill side if the gate were built in rectangular shape.

Powered by LiftMaster SUB300 opener for remote control access.

2011-2015

康樂園電動趟閘:

The gate pattern is mathematically generated and CNC cut from a 1-piece of stainless steel.

The back side of the gate is covered by perforated screen to limit see-through.

Powered by LiftMaster SLY500 opener for remote control access.

2011-2015

八鄉占峰電動趟閘:

We were contracted by developer to build a slide gate with matching pedestrian side gate

The slide gate is powered by LiftMaster SLY500 for remote-control access.

Mobile phone control is also installed.

2011-2015

4 meter slide gate: (2013)

We were contracted by Sun Hong Kai to build a mock-up slide gate for one of her development.

The slide gate is powered by LiftMaster SLY500 for remote-control access.

As-built shop-drawings were submitted for later tendering process.

2011-2015

5 meter fold gate: (2013)

We were contracted by Sun Hong Kai to build a mock-up fold gate for one of her development.

The resulting fold gate consists of 2.5 leaf on each side powered by LiftMaster SUB300 underground openers for remote-control access.

As-built shop-drawings were submitted for later tendering process.

2011-2015

西貢菠蘿輋電動摺閘:

Because of the geometry of the garden, we designed the system so that the left side folds in whilst the right side folds out.

The system is driven by LiftMaster SUB300 under-ground openers for remote-control access.

The left side can be controlled singly for pedestrian access.

2011-2015

南朗山新加坡國際學校8米電動趟閘:

This gate is driven by a LiftMaster SLY 1000 electric openers.

Security guard controls the gate with keyed switch for visitor access.

School personnel would access with remote control.

Infrared sensors, emergency-stop, flash and sounder are installed for safety compliance.

2011-2015

清水灣君爵堡電動摺閘:

Steel framed fold gate with wood cladding and wicket door for easy pedestrian access.

The fold gate is powered by LiftMaster SUB500 for remote-control access.

The remote control can also open the wicket door separately.

2011-2015

西貢黃毛應一體式車房門:

這是香港第一度木紋鋁合金車房門.

我們選用了美國力馬最強勁的LM1000皮帶車房門開門機.

車房門上方的磨砂鋼化玻璃方便採光.

旁邊的小門方便行人出入.

2011-2015

大嶼山長沙鐵藝掩閘:

大嶼山某小區為了不讓牛群進入停車場請我們設計鐵閘.

我們安裝了使用力馬SCS300的古典鐵花掩閘.

業主使用遙控器進出停車場,電閘更有自動關門功能.

請點擊這裡了解詳情.

2011-2015

清水灣君爵堡電動摺閘:

設計師邀請我們為VIP客戶設計和安裝車房門.

目標車房坐落在1:18的斜坡上.

我們設計了水平的地面並安裝了木紋平板連體式車房門.

我們為4米的車房門安裝美國力馬開門機,運作非常寧靜.

2011-2015

淺水灣寶晶苑電動摺閘:

我們為淺水灣豪宅設計了對開折疊式掩閘.

除了遙控器外,用戶也可以使用手提電話控制電閘.

大閘經過熱鍍鋅處理,防銹十年.

請點擊這裡觀看短片.

2011-2015

大埔許願樹雙開趟閘:

位於林村的業主為獨立屋選擇了對開趟閘.

對開趟閘最大限度地節約空間,增加泊車位置.

使用3鍵遙控器,業主可以單獨打開右邊的行人閘,或同時打開雙閘讓汽車出入.

我們為5米的對開趟閘安裝了美國力馬開門機,運作非常寧靜.

2011-2015

斜坡上的鋁合金車房門:

由於捲閘及橫幅式車房門都不適宜在斜坡上安裝,我們為業主設計了頗具特色的一體式車房門.

We designed and built this 1-piece garage door on a 1:15 slope in Clear Water Bay.

一體式車房門可以在1:15的斜坡上離地安裝.

車框為鋁合金,門板為3mm厚鋁板和鋼化玻璃.

我們為5.2米的車房門安裝美國力馬皮帶開門機,運作非常寧靜.

2011-2015

斜坡上的鋁合金車房門:

由於捲閘及橫幅式車房門都不適宜在斜坡上安裝,我們為業主設計了頗具特色的一體式車房門.

一體式車房門可以離地安裝.

車框為木紋鋁合金,門板為3mm厚鋁板.

我們為4.7米的車房門安裝美國力馬皮帶開門機,運作非常寧靜.

2011-2015

4 meter slide gate: (2012)

The owner in Kam Sheung Road would like a have the gate in natural wood.

We designed a slide gate system with a LiftMaster SLY 300 openers.

By using a 3-button remote control, he controls the gate in car mode and pedestrian mode.

We also wired up the garden light so that when the gate is activated at night with remote control, the garden light will be turned on too.

2011-2015

4.5m Aluminum-glass 1-piece garage door: (2012)

The owner in Hong Lok Yuen would like an unique garage door.

We designed and built this 1-piece garage door with tinted glasses.

The tinted glasses have a see-thru rate of 60% from inside to outside, and about 20% from outside to inside.

LiftMaster LM800A garage door opener installed for quiet and smooth operation.

2011-2015

鋁合金-實木-鋼化玻璃電動車房門:

開發商為獨立屋選定了實木車房門.

穩得利為他設計鋁合金門框-玻璃-實木一體式車房門.

車庫門安裝了美國力馬皮帶開門機,運作格外寧靜.

一體式車房門的開關速度是一般車房門的2倍,比捲閘快3倍.

2011-2015

加州花園對開電動趟閘:

業主要為獨立屋安裝實木趟閘.

穩得利為他設計了使用2部美國力馬的對開趟閘.

使用3鍵遙控器,業主可以單獨打開左邊的行人閘,或同時打開雙閘讓汽車出入.

我們更安裝了防跌鋼架,確保安全.

2011-2015

4.5m 鋁合金-鋼化玻璃電動車房門:

業主要為海邊的別墅安裝既能突出個性又適合海邊環境的車房.

穩得利為他安裝了美國Clopay的鋁合金-鋼化玻璃車房門.

鋁合金-鋼化玻璃完全適合海邊潮濕咸氣重的環境.

白色的鋁框和磨砂玻璃完全溶入別墅的建筑風格.

到了晚上, 半透明的玻璃讓車房變成一處美麗的夜景.

2016-2021

深水灣高速趟閘 (2020)

Class gate design withe bronze decos.

Motorized by Tousek TPS 40Pro Hi-speed motor.

Mechanical brake, force sensor and safety edge.

Weights 2 ton.

Chain-cable system for intercom and wicket door.

2016-2021

南灣伸縮趟閘+掩閘 (2020)

Cantilever system designed for 7m opening width.

To open, the telescopic slide gate retracts into the swing gate, then the swing gate powered by 2 Tousek Swing X arms opens the gate.

Swing gate supported by LiftMaster hinges designed for swing gate upto 3,000 Lbs.

Tousek SafeLock system with Ø23 shaft.

2016-2021

K11 Renlita 上升閘 (2019)

Counter weight balanced vertical bifold door.

Proprietary Renlita door made in USA.

Motorized by LiftMaster shaft operator.

Weights 4 ton at 8.1m wide x 6.2m high.

This is one of the largest automatic vertical bifold door in Hong Kong.

2016-2021

馬會弧形趟閘 (2018)

High speed curved slide gate for 8m wide driveway.

Proprietary design Ø30 stainless steel curved rail.

Tousek motor controlled by frequency convertor for high speed operation.

Equipped with mechanical brake, absolute encoder and safety edges.

Design-and-build in record breaking 2-month lead time.

2016-2021

小欖上山趟閘 (2018)

Trapezoidal shape, even gap at bottom to fit 6m wide driveway.

Proprietary 1-way reduction gear to balance the gate in manual mode.

Driven by 3-phase Aprimatic motor for smooth operation.

Equipped with mechanical travel limits and safety edge.

UHF radar for automatic access control.

2016-2021

馬會大舘重型掩閘 (2018)

BD approval superstructure (Metal Gate).

9m(w)x5m(h), powered by 2 Aprimatic hydraulic arms on each side.

The larger leaf is over 2.5T in weight.

This is one of the largest automatic gates in Hong Kong.

Built-in door-in-door for pedestrian access.

2016-2021

數據中心防撞趟閘 (2017)

7m(w)x2.4m(h) slide gate powered by 3-phase motor at a high-security data center in TKO.

K4 rated designed and built by Avon UK, our partner in rated security barriers.

Ideal for embassy, bank, data center.

GMS frame, powder coat finished.

2016-2021

清水灣上山趟閘: (patent pending)

Uphill slide gate on 4° incline, no hang rail, 5m(w)x2.7m(h) opening.

Powered by Tousek frequency-converter motor for remote control access.

Mechanical brake holds the gate in stop position.

Aluminium cladded GMS frame, double-layer aluminium tree pattern.

2016-2021

赤柱轉彎趟閘: (patent pending)

On-track curved slide gate, no hang rail, 5m(w)x3.2m(h) opening.

Powered by Tousek frequency conventer motor for remote control access.

Ideal for car park with no side room for normal slide gate.

Aluminium cladded GMS frame, aluminium grille construction.

2016-2021

淺水灣19米無軌式趟閘: (2017)

On-slope cantilever gate, no hang rail, no ground rail, 10m(w)x3.2m(h) opening.

Powered by Aprimatic 3-phase motor for remote control access.

Ideal for sloped car park entrance with adequate side room.

GMS frame, aluminium cladding inside, skew fins outside, dual color.

2016-2021

8 meter telescopic gate: (2016)

Patented telescopic gate, both leaves driven by a single motor.

Powered by Tousek frequency converter motor for remote control access.

Ideal for car park entrance with limited side room.

GMS frame, aluminium cladding, matching fence wall.

2016-2021

城門之源配重趟閘: (2016)

On-slope slide gate, no hang rail, no ground rail, balanced by counter weight.

Powered by Tousek frequency converter motor for remote control access.

Ideal for sloped car park entrance with limited side room.

GMS frame, aluminium cladding with operable louvers.

2016-2021

大坑道伸縮趟閘: (2016)

6m slide gate GMS frame, GMS frame wrought iron pattern, dual-color.

Powered by Aprimatic motor for remote control access.

Ideal for car park with limited side room.

2 times faster than normal slide gate.

2016-2021

新錫路伸縮趟閘: (2016)

6m slide gate GMS frame, aluminium double-layer pattern, dual-clor.

Powered by Aprimatic motor for remote control access.

Ideal for car park with limited side room.

2 times faster than normal slide gate.

2016-2021

石澳趟閘: (2016)

8m slide gate GMS frame, aluminium double-layer pattern, tempered glass.

Powered by Aprimatic 3-phase motor for remote control access.

Aluminium frame and tempered glass construction for seaside salty environment.

Owner designed this beautiful pattern, we built the whole facade.

2016-2021

石澳 Renlita 車房門: (2016)

One of it kind Renlita stacking door for garage without roof.

Powered by ZAP opener for remote control access.

Aluminium frame and tempered glass construction for seaside salty environment.

Owner designed this beautiful pattern, we built the whole facade.